Q 1) What is the dosage
Q 2) How does it works
Q 3) How to get rid of Fish eye problem
Q 4) Is there any extra precaution required?
Q 5) Any special part / Machine required to use RecycloAid
Q 6) Is it feasible / economical for high value scrap
Q 7) What if the whole packet is not utilized
Q 
Cost saving and processing improvement is achievable if so, How?
Q10) Does it provide you any flexibility?
A 1) 0 1-2% depending on the nature of Polymer/Scrap
A 2) While processing in the screw barrel it reacts with the moisture or volatiles and form a stable compound.
A 4) Following are the extra precaution
- This is a very sensitive Additive to humidity as it reacts with atmosphere and deactivates
- This 1Kg packet should be used immediately after opening. If the material is left in the packet after use close it carefully so that material is air tight.
- Do not keep the material mixed with Additive for more than four hours. So mix whatever is to be used.
- Do not mix fresh material to the Additive mixed material kept for more than four hours.
- Hopper dries are not required while using Additive as hot air may deactive the Additive.
A 6) No, it is very effective for low value scrap
A 7) The material should be kept Air Tight
A Same as the sheet provided to you earlier
A 9) You can use in both the ways.
A 10) It gives the flexibility to use next lower grade of scrap
Follow Us!